HOME

 

 HOME

Rural & Commercial Solar Farm Energy Investment Calculators, show the difference between Fixed Tilted & DAT Solar Racking.

Please Note: A 100KW Solar Array is the Largest capacity allowable if you intend to Came the One-off payment of $52'000, for the Government Renewable Energy Credits (REC) Scheme, the Payment is for 10 years REC's, payment is Only made after the installation has been approved by a CEC accredited Installer. $52k more than covers the Solar Panels & Cabling Costs.

:: Rural & Semi-COMMERCIAL SYSTEMS ::

100KW Dual Axis Tracking (DAT), Solar Farm
Generates 1.1MW of Energy per Day, using 225 Solar Panels.

:: COMMERCIAL SOLAR SYSTEMS ::

These calculators to evaluate the MW of Energy you want to Generated per Day!

NB: Flat & Fixed Tilted (FT) Solar Racking are the most inefficient Racking, as a 5MW FT array requires 6'200 more solar panels to generate the same energy as 2.27MW DAT array!

Flat & Fixed Tilted Solar Racking wastes money purchasing excessive quantities of Solar Panels, that in turn can only generate Peak Energy for approx, 5 hours per Day, this alone is what is causing the controversial "Over Supply" of Energy during the Mid-day period.

The only way to reduce this "mid-day Over Supply", is for the Retailers & Solar Installers to start spreading 1/2 or 1/3 of the solar panels between North West and North East, then Peak generation will Start earlier in the Morning & well into the Evening, or install Commercial Energy Storage Modules, then the Generator (system owner) can sell there energy to the State Grid for a Higher feed in rate during Peak Demand times, this is commonly early Morning or late Evening!

REMEMBER: Both the 2.27MW DAT Solar Farm and 5MW FT Solar Farm above, both Generate 25MWh/p Energy per Day, clearly showing the superior energy Generated by a Dual Axis-solar Tracking array!

The Cost savings for just the Solar Panels on a 5MW DAT System, is over $1.2 Million dollars, and yes, a DAT system costs more, however the savings go towards a more difficult installation, where the real pay-off is a DAT Superior Generation, of up to 14 hours per Day if installed in Tasmania, as DATs are more efficient the further South or North you reside of the Equator!

We find this is the main point nearly all investors don't understand, the saving made on purchasing substantially less Solar Panels, further reduces the installation Labour substantially.

DAT Racking also provides other bonuses, like being able to use the land below the DAT units or make for easier mowing & land maintenance, as well as greatly reduce your pay-back time.

 

Privacy Policy | All materials within this website are Copyright © of Australian MicroPowerGrids.com.au 2021